40 replies to this topic

[Costa54]

So my phone says home screen stopped responding or something similar to that. I am able to get the phone charged and up booted up to the Motorola "M"  spashscreen but I cant go ay further and I can not use rsd to flash any img files and fast bood stays on "waiting for Device"

[spainter]

So my phone says home screen stopped responding or something similar to that. I am able to get the phone charged and up booted up to the Motorola "M"  spashscreen but I cant go ay further and I can not use rsd to flash any img files and fast bood stays on "waiting for Device"

House of Moto can bring you out of this. 

Please Login or Register to see this Hidden Content

Read all instructions then read them again. When you read through the posts you will see others that have had the problem and fixed it.

[Costa54]

Alright I will try this, have been looking for weeks now and have had no luck, thanks ill will give this a shot hopefully it works

[Costa54]

no luck with HouseOfMoto it keeps saying "failed to flash partition"

[spainter]

no luck with HouseOfMoto it keeps saying "failed to flash partition"

What file was you trying to flash.  Also House of moto will create a log file read in the instructions how to grab it and cut and paste it to a post here so we can see what is going on.

[RikRong]

I did get your PM, but I'd rather answer in a public forum so other people can see the answer.

Basically, you need to figure out what firmware your phone originally was on. You can't keep flashing random stuff and hope it will work.

[Costa54]

I did get your PM, but I'd rather answer in a public forum so other people can see the answer.

Basically, you need to figure out what firmware your phone originally was on. You can't keep flashing random stuff and hope it will work.

i don't remember what firmware i was on as i updated unofficially through one of SamuriHL's utility's because i was rooted and not able to accept the ota update

[Costa54]

What file was you trying to flash.  Also House of moto will create a log file read in the instructions how to grab it and cut and paste it to a post here so we can see what is going on.

would you wanna see the log from when i ran the HouseOfMoto.jar?

[spainter]

would you wanna see the log from when i ran the HouseOfMoto.jar?

yes

[Costa54]

yes

Custom recovery not found.

Using factory image: VZW_XT926_4.4.2-KDA20.62-15.1_1FF.xml.zip

Extracting: gpt.bin

...CRC32 checksum: 1905572778

Extracting: sbl3.mbn

...CRC32 checksum: 3659908926

Extracting: logo.bin

...CRC32 checksum: 321084888

Extracting: sbl2.mbn

...CRC32 checksum: 3090468626

Extracting: emmc_appsboot.mbn

...CRC32 checksum: 90899438

Extracting: fsg.mbn

...CRC32 checksum: 1133177070

Extracting: sbl1.mbn

...CRC32 checksum: 192526102

Extracting: system.img

...CRC32 checksum: 1766757038

Extracting: rpm.mbn

...CRC32 checksum: 2091525295

Extracting: NON-HLOS.bin

...CRC32 checksum: 3098529230

Extracting: tz.mbn

...CRC32 checksum: 622631404

Extracting: recovery.img

...CRC32 checksum: 1159195623

Extracting: boot.img

...CRC32 checksum: 1240879109

Extracting: VZW_XT926_4.4.2-KDA20.62-15.1_1FF.xml

...CRC32 checksum: 2272597960

Found VZW_XT926_4.4.2-KDA20.62-15.1_1FF.xml

Writing script: C:\HouseOfMoto\MOTO\flashme.bat

[spainter]

Ok everything looks like it is good there.  First you said you couldn't get rsdlite to find the drive.  That would either be usb, moto driver, or cable.  Make sure the usb port is a 2.0 not 3.0 and the cable is a motorola cable reload the drivers.

Please Login or Register to see this Hidden Content

unzip this to a folder on your hard drive.  put your phone in fastboot mode and connect the cable. Go to the folder you unziped the snapdragon support file and open a command window.  Switch to the windows folder and type fastboot devices and hit enter.  This should bring a response back listing your devices serial number under devices. That will tell us if fastboot is working properly as well as the drivers.

[spainter]

If it does show your devices serial number type in fastboot getvar all    cut and past that to a post here that will tell us what version your phone is running and also give a look for errors.

[Costa54]

Ok everything looks like it is good there.  First you said you couldn't get rsdlite to find the drive.  That would either be usb, moto driver, or cable.  Make sure the usb port is a 2.0 not 3.0 and the cable is a motorola cable reload the drivers.

Please Login or Register to see this Hidden Content

unzip this to a folder on your hard drive.  put your phone in fastboot mode and connect the cable. Go to the folder you unziped the snapdragon support file and open a command window.  Switch to the windows folder and type fastboot devices and hit enter.  This should bring a response back listing your devices serial number under devices. That will tell us if fastboot is working properly as well as the drivers.

C:\Users\Adrian\Desktop\SNAPDRAGON_FXZ_SUPPORT (1)\Windows>fastboot devices

TA64803OQP      fastboot

 

C:\Users\Adrian\Desktop\SNAPDRAGON_FXZ_SUPPORT (1)\Windows>fastboot getvar all

version-bootloader: 109B(*)

product: vanquish

secure: yes

mid: 0056

version: 0.5

serialno: TA64803OQP

qe: qe 1/1

unlocked: yes

iswarrantyvoid: yes

max-download-size: 31457280

emmc-size: 16GB

reason: Boot menu selected

revision-hardware: 0x8300

cpu: MSM8960 CS

uid: D564D90102000200000000000000

cid: 0x02

all:

finished. total time: 0.024s

 

C:\Users\Adrian\Desktop\SNAPDRAGON_FXZ_SUPPORT (1)\Windows>

[spainter]

it should look something like this

moto_fastboot\Windows>fastboot getvar all
(bootloader) version-bootloader: 30B7
(bootloader) version: 0.5
(bootloader) cpu: MSM8960 Pro CS
(bootloader) ram: 2048MB Samsung S4 SDRAM DIE=4Gb
(bootloader) emmc: 32GB Sandisk REV=06 PRV=07 TYPE=17
(bootloader) product: ghost
(bootloader) revision-hardware: 0x8300
(bootloader) radio: 0x2
(bootloader) secure: yes
(bootloader) mid: 026b
 

[Costa54]

it should look something like this

moto_fastboot\Windows>fastboot getvar all
(bootloader) version-bootloader: 30B7
(bootloader) version: 0.5
(bootloader) cpu: MSM8960 Pro CS
(bootloader) ram: 2048MB Samsung S4 SDRAM DIE=4Gb
(bootloader) emmc: 32GB Sandisk REV=06 PRV=07 TYPE=17
(bootloader) product: ghost
(bootloader) revision-hardware: 0x8300
(bootloader) radio: 0x2
(bootloader) secure: yes
(bootloader) mid: 026b
 

is what i posted correct or did i do something wrong?

[spainter]

everything looks to be working ok there too.

you did everything right.

[spainter]

while it is still in that state go ahead and try to use house of moto again and run the flashme.bat file with out unhooking  the phone.

[Costa54]

while it is still in that state go ahead and try to use house of moto again and run the flashme.bat file with out unhooking  the phone.

no luck

[spainter]

what happend when you ran the flashme.bat file?

[Costa54]

what happend when you ran the flashme.bat file?

Flash GPT partition? [y/n]: y

(bootloader) Variable not supported!

target max-download-size: 30MB

sending 'partition' (32 KB)...

OKAY [  0.021s]

writing 'partition'...

(bootloader) This may take a few seconds, if

(bootloader) different partition table is be

(bootloader) flashed since we need to backup

(bootloader) and restore a few partitions

(bootloader) Failed to program partition tab

FAILED (remote failure)

finished. total time: 0.348s

(bootloader) Variable not supported!

target max-download-size: 30MB

sending 'sbl1' (101 KB)...

OKAY [  0.027s]

writing 'sbl1'...

(bootloader) Failed to erase partition

(bootloader) Failed to flash partition sbl1

FAILED (remote failure)

finished. total time: 0.170s

(bootloader) Variable not supported!

target max-download-size: 30MB

sending 'sbl2' (127 KB)...

OKAY [  0.026s]

writing 'sbl2'...

(bootloader) Failed to erase partition

(bootloader) Failed to flash partition sbl2

FAILED (remote failure)

finished. total time: 0.182s

(bootloader) Variable not supported!

target max-download-size: 30MB

sending 'sbl3' (512 KB)...

OKAY [  0.060s]

writing 'sbl3'...

(bootloader) Failed to erase partition

(bootloader) Failed to flash partition sbl3

FAILED (remote failure)

finished. total time: 0.364s

(bootloader) Variable not supported!

target max-download-size: 30MB

sending 'rpm' (140 KB)...

OKAY [  0.029s]

writing 'rpm'...

(bootloader) Failed to erase partition

(bootloader) Failed to flash partition rpm

FAILED (remote failure)

finished. total time: 0.321s

Flash TZ partition? [y/n]: