9 replies to this topic

[reddevilz]

Hi All,

 

Here is what has happened to my phone (XT926, Moto Razr Maxx HD):

 

- It was suddenly showing nothing and I tried VOL DOWN+POWER to reset it.

- After that it stops in Red Moto Logo (I think is the booting stage) and nothing can be done

- I searched the net, and found the HARD RESET, I wiped the data and rebooted, after the reboot nothing happens, screen is black (waited even for 1 day!)

 

- Read some stuff about flashing and... put the phone in AP FLASH Mode, downloaded RSD Light and a firmware which is

 VZW_XT926_4.4.2-KDA20.62-15.1_1FF.xml

 

- Phone is deteced by RSD Light but when I choose the firmware and click START, at the first step it will fail saying that:

 

"Failed flashing process. 1/17 flash partition "gpt.bin" -> Phone returned FAIL."

 

Any idea what can I do to solve this issue? I don't even know if this flashing is the right way or not +

My Android was Jelly Bean I think, but 4.4.2 is KitKat. Can that be the issue in flashing? If yes and if the flashing is the solution, where can I find the firmware for X926?

[ciscokid916]

check xda-developers first. If not google it. Do a little leg work lol

[spainter]

Hi All,

 

Here is what has happened to my phone (XT926, Moto Razr Maxx HD):

 

- It was suddenly showing nothing and I tried VOL DOWN+POWER to reset it.

- After that it stops in Red Moto Logo (I think is the booting stage) and nothing can be done

- I searched the net, and found the HARD RESET, I wiped the data and rebooted, after the reboot nothing happens, screen is black (waited even for 1 day!)

 

- Read some stuff about flashing and... put the phone in AP FLASH Mode, downloaded RSD Light and a firmware which is

 VZW_XT926_4.4.2-KDA20.62-15.1_1FF.xml

 

- Phone is deteced by RSD Light but when I choose the firmware and click START, at the first step it will fail saying that:

 

"Failed flashing process. 1/17 flash partition "gpt.bin" -> Phone returned FAIL."

 

Any idea what can I do to solve this issue? I don't even know if this flashing is the right way or not +

My Android was Jelly Bean I think, but 4.4.2 is KitKat. Can that be the issue in flashing? If yes and if the flashing is the solution, where can I find the firmware for X926?

Setup House of Moto 4.1 Read the instructions and make sure you have the right cable and using a usb 2.0 port.

[mahtab]

Same Problem. Do you find any solution? Waiting for your response.

[spainter]

He hasn't been back. So I am in sure he got it or not. But the suggestion is still the same. HOM will help you. It has its own thread under Motorola devices. I would post a link but I am on a Verizon crappy tablet and it doesn't seem to work.

Sent from my Verizon Crappa Tablet

[RikRong]

He hasn't been back. So I am in sure he got it or not. But the suggestion is still the same. HOM will help you. It has its own thread under Motorola devices. I would post a link but I am on a Verizon crappy tablet and it doesn't seem to work.

Sent from my Verizon Crappa Tablet

Helping a brother out:

Please Login or Register to see this Hidden Content

[4.1] .

[mahtab]

I have no idea what firmware was on my XT926, all I can remember is that it was latest 4.4.2 version available from verizon. tried to flash this firmware using HOM

VZW_XT926_4.4.2-KDA20.62-10.1_CFC_1FF.xml

It was stated on the forum that this version can be flashed on any version of firmware can't supply this link at this time.

The result of flashme.bat are added as screen shot with the post.

Attached Files

•  repair 01.jpg   123.01KB   2 downloads
•  repair 02.jpg   153.45KB   2 downloads
•  repair 03.jpg   106.4KB   2 downloads

[spainter]

If you were on the latest firmware that would be the VZW_XT926_4.4.2-KDA20.62-15.1_CFC_1FF.xml The .10.1 firmware you was trying to flash would give you a security failure. You can get the latest file here:

Please Login or Register to see this Hidden Content

Also there are updated files to drop into HOM make sure you download and unzip the snapdragon support files into the tools directory of HOM

[mahtab]

Unzipped HouseofMoto in C:\

Unzipped SNAPDRAGON_FXZ_SUPPORT and paste it in tools folder.

run .jar file and selected VZW_XT926_4.4.2-KDA20.62-15.1_1FF.xml.zip from 

images directory.

Run flashme.bat file and got output as following images.

Attached Files

•  Repair 001.jpg   90.78KB   3 downloads
•  Repair 002.jpg   117.61KB   3 downloads
•  Repair 003.jpg   59.64KB   3 downloads

[RikRong]

I think I've seen somewhere that a remote failure means you're not using the OEM cable or are trying to use a 3.0 USB.