2641 replies to this topic

[nakedtime]

I was still getting sleep of death on 8/20, so I switched back to 10.1  

I'm ready to hop back at moments notice whenever stability and possibly 3g arrive

[eanes_87]

I just experienced the "sleep of death" on 8/20 as well. Battery pull and it was fine for the rest of the day. Gonna give the 8/21 a shot right now. CM10.2 is amazingly smooth on my poor old bionic though, and decently stable aside from the hiccup earlier today.

[marleyinoc]

Lots of sod for me on first 10.2. -- now downloading 8/21 ... Thing is stock acts up for me too so I'm sticking with it.

I'm not complaining since it is so early builds. Nor would I complain anyway. Another thing is my phone sucks at 1200mhz but it won't remember 1000 so I forget to reset and then I get more sleeps, lol.

Sent from my XT875 using Tapatalk 4

[nakedtime]

Yeah gotta remember 10.1 took about 8 months to work out all the hiccups.

The first build was like early December. The first relatively stable build was late may. And the first amazingly stable build wasn't until late July.

[eanes_87]

Any way to overclock on cm10.2 (or 10.1 for that matter)?

Sent from my XT875 using Tapatalk 4

[marleyinoc]

My phone defaults to 1200 and then acts a fool. Bionic doesn't have ability to use a custom kernel, right? So that sort of OC hasn't ever been popular..

Sent from my XT875 using Tapatalk 4

[eanes_87]

I used to overclock with tweakerz, obviously that didn't work with cm. I didn't get the bump to 1.2ghz like some did, and for me, when I overclocked, it made a difference.

Sent from my XT875 using Tapatalk 4

[LDubs]

Hold on, I was just reading through a few older posts - am I reading correctly that there is no 3G data on 10.2?

[nakedtime]

Hold on, I was just reading through a few older posts - am I reading correctly that there is no 3G data on 10.2?

Correct. 1xRT and EVDO are not working yet.

[csantarcangelo]

Anyone else having issues downloading the 8/21 nightly?

EOL Bionic running 4.3

I did too, but I tried again about an hour later and it worked fine.

[LDubs]

Correct. 1xRT and EVDO are not working yet.

 

Hmm this may be a dealbreaker, I get very crappy reception at work and often bounce around betw 4G, 3G, and even 1X ( )... 

[nakedtime]

Hmm this may be a dealbreaker, I get very crappy reception at work and often bounce around betw 4G, 3G, and even 1X ( )... 

8/21 has been stable for me, but I haven't seen other benefits. (battery life is very similar to 10.1, speed same as 10.1)

I think they had to dial it back a bit for some stability. This happened with RC3 and RC 4 of 10.1

[BKiv]

I did too, but I tried again about an hour later and it worked fine.

Yea it worked. Just tried later. Super stable and smooth.

EOL Bionic running 4.3

[DrJay]

As a tip for those who are having problems with the CM10.2 builds I have noticed that the rom is very voltage sensitive. It will run flawlessly until about 10 percent battery life (about 3000mv) then, for me, weird things start to happen. Dialer fails with a warning, random reboots, can't open contacts and lag etc. Be sure to keep the battery above 10 percent or 3000mv to keep it stable. This is just my phone and my experience but it may help you if you're having problems. This is on my original stock battery that's over 2 years old. May be time for a new battery..... :-P

Sent from my JB DROID BIONIC using my fingers

[The Persuader]

As a tip for those who are having problems with the CM10.2 builds I have noticed that the rom is very voltage sensitive. It will run flawlessly until about 10 percent battery life (about 3000mv) then, for me, weird things start to happen. Dialer fails with a warning, random reboots, can't open contacts and lag etc. Be sure to keep the battery above 10 percent or 3000mv to keep it stable. This is just my phone and my experience but it may help you if you're having problems. This is on my original stock battery that's over 2 years old. May be time for a new battery..... :-P

Sent from my JB DROID BIONIC using my fingers

You Nailed it Man...that is exactly what happen...

It's Bubba
"Stubborn In Your Bones"

[marleyinoc]

Hmm. My stock battery hardly got used. I might go back to that. But I'm pretty spoiled with the extended

Sent from my XT875 using Tapatalk 4

[nakedtime]

As a tip for those who are having problems with the CM10.2 builds I have noticed that the rom is very voltage sensitive. It will run flawlessly until about 10 percent battery life (about 3000mv) then, for me, weird things start to happen. Dialer fails with a warning, random reboots, can't open contacts and lag etc. Be sure to keep the battery above 10 percent or 3000mv to keep it stable. This is just my phone and my experience but it may help you if you're having problems. This is on my original stock battery that's over 2 years old. May be time for a new battery..... :-P

Sent from my JB DROID BIONIC using my fingers

The minimum voltage for operation on this device is 3000mV sir. The only error here is that your phone hasn't powered off yet.

[nakedtime]

Hmm. My stock battery hardly got used. I might go back to that. But I'm pretty spoiled with the extended

Sent from my XT875 using Tapatalk 4

I recently switched back to stock battery, and after the almost 2 years of use, my stock battery has about the same capacity as my extended

[marleyinoc]

I can believe that. I'm going to put mine in this weekend and see how it does.

Sent from my XT875 using Tapatalk 4

[nakedtime]

I can believe that. I'm going to put mine in this weekend and see how it does.

Sent from my XT875 using Tapatalk 4

My extended started to get pretty bulgy. I'm guessing that would account for some of the loss of capacity. 

Charge rate, number of cycles, discharge rate, and max operating temperature all factor into rate of capacity loss.

Coincidentally, all four of those things could also cause cells to bulge.