163 replies to this topic

[paperinik]

So, was the app ever reloaded for Linux/Mac??? I am trying to flash stock on my Razr Maxx HD, but need some true magic.

[johnthehillbilly]

So, was the app ever reloaded for Linux/Mac??? I am trying to flash stock on my Razr Maxx HD, but need some true magic.

I put the link to the updated files a couple posts above.... I was hoping someone could try them out before I rebuilt the entire utility.... just in case they don't work properly

sent from my tapatalked DROID RAZR....from somewhere between lost and found....

[paperinik]

I'm a total n00b at this. I hope that the basic following of the steps can guarantee success. Otherwise, I'll have to wait to get back to a PC machine.

[johnthehillbilly]

I'm a total n00b at this. I hope that the basic following of the steps can guarantee success. Otherwise, I'll have to wait to get back to a PC machine.

Make sure you get the updated script.(from previous post(s) .. copy and paste into the utility folder.... and you can also get the updated fastboot files ...... please post back here let us know if it works (doesn't work)..... thank you

sent from my tapatalked DROID RAZR....from somewhere between lost and found....

[paperinik]

I got all that. I downloaded that readme you posted as well. Should I factory reset before i start?

[johnthehillbilly]

I got all that. I downloaded that readme you posted as well. Should I factory reset before i start?

Sure.... you can.... you don't have to... the utility will pretty much do it as well :-)

sent from my tapatalked DROID RAZR....from somewhere between lost and found....

[paperinik]

When I try this step

"7. Type ./files/adb devices. The return line should show something like: "0A4DFG022L01402A device." If you get nothing, then the files are not unzipped or you are in the wrong directory, or you have a bad port, bad cable, or both. Check your connections, and/or go back to the start and make sure you followed these directions exactly."


It returns nothing. Any ideas? I did a ls, so I know I am in the right directory.

[johnthehillbilly]

When I try this step

"7. Type ./files/adb devices. The return line should show something like: "0A4DFG022L01402A device." If you get nothing, then the files are not unzipped or you are in the wrong directory, or you have a bad port, bad cable, or both. Check your connections, and/or go back to the start and make sure you followed these directions exactly."


It returns nothing. Any ideas? I did a ls, so I know I am in the right directory.

That step has been pretty hit or miss even with previous utilities..... I would try running the script.... see if it recognizes your phone.....

sent from my tapatalked DROID RAZR....from somewhere between lost and found....

[paperinik]

Ok, so, I am getting through everything, but nothing is happening on my screen. In AP Fastboot mode, the device doesn't give me the OK to Program message. Is that normal?

[johnthehillbilly]

Ok, so, I am getting through everything, but nothing is happening on my screen. In AP Fastboot mode, the device doesn't give me the OK to Program message. Is that normal?

It should say "ok to program" .... you can't properly flash if not..... does it say USB connected? ..... if not, its not recognizing your phone....

sent from my tapatalked DROID RAZR....from somewhere between lost and found....

[paperinik]

it does recognize when i connect and disconnect. i can see that on the screen, just no OK TO PROGRAM.

[johnthehillbilly]

it does recognize when i connect and disconnect. i can see that on the screen, just no OK TO PROGRAM.

Odd..... will it still boot normally... and charge (so it wont die while we figure this out)

sent from my tapatalked DROID RAZR....from somewhere between lost and found....

[paperinik]

Odd..... will it still boot normally... and charge (so it wont die while we figure this out)

sent from my tapatalked DROID RAZR....from somewhere between lost and found....

It does boot normally. One thing to note is that I am using a foreign sim (Australian). I can put the Verizon one back in if need be, but I didn't think it would matter.

[johnthehillbilly]

It does boot normally. One thing to note is that I am using a foreign sim (Australian). I can put the Verizon one back in if need be, but I didn't think it would matter.

That might be the problem.... this is for Verizon cdma :-)

sent from my tapatalked DROID RAZR....from somewhere between lost and found....

[paperinik]

Hmm, still didn't get the OK to program.

Here are the error messages in the script...

writing 'moden'...
(bootloader) Unkown partition name moden
FAILED (remote failure)
finished. total time: 2.422s
sending 'devtree' (512 KB)...
OKAY [ 0.049s]
writing 'devtree'...
OKAY [ 0.492s]
finished. total time: 0.541s
erasing 'modemst1'...
OKAY [ 0.708s]
finished. total time: 0.708s
erasing 'modenst2'...
(bootloader) Invalid partition name modenst2
FAILED (remote failure)
finished. total time: 0.030s
erasing 'cache'...
OKAY [ 1.134s]
finished. total time: 1.134s
erasing 'tombstones'...
OKAY [ 0.867s]
finished. total time: 0.867s
rebooting into bootloader...
OKAY [ 0.008s]
finished. total time: 0.008s
Press Enter When The Screen Comes Back On

[johnthehillbilly]

Hmm, still didn't get the OK to program.

Here are the error messages in the script...

writing 'moden'...
(bootloader) Unkown partition name moden
FAILED (remote failure)
finished. total time: 2.422s
sending 'devtree' (512 KB)...
OKAY [ 0.049s]
writing 'devtree'...
OKAY [ 0.492s]
finished. total time: 0.541s
erasing 'modemst1'...
OKAY [ 0.708s]
finished. total time: 0.708s
erasing 'modenst2'...
(bootloader) Invalid partition name modenst2
FAILED (remote failure)
finished. total time: 0.030s
erasing 'cache'...
OKAY [ 1.134s]
finished. total time: 1.134s
erasing 'tombstones'...
OKAY [ 0.867s]
finished. total time: 0.867s
rebooting into bootloader...
OKAY [ 0.008s]
finished. total time: 0.008s
Press Enter When The Screen Comes Back On

Looks like you are using the original script.... there is a typo in it....

sent from my tapatalked DROID RAZR....from somewhere between lost and found....

[paperinik]

Looks like you are using the original script.... there is a typo in it....

sent from my tapatalked DROID RAZR....from somewhere between lost and found....

I have the new ones and copied them where you said to. They must not be different somehow. Can you check your zip file?

[johnthehillbilly]

I have the new ones and copied them where you said to. They must not be different somehow. Can you check your zip file?

Absolutely yes I will check it right now........ looks like everything else went thru ok tho.....

sent from my tapatalked DROID RAZR....from somewhere between lost and found....

[johnthehillbilly]

I have the new ones and copied them where you said to. They must not be different somehow. Can you check your zip file?

Here is the updated script.... put it in place of the one that was included in the zip.....

Please Login or Register to see this Hidden Content

sent from my tapatalked DROID RAZR....from somewhere between lost and found....

[paperinik]

Thanks, looks like it worked.