#1781
Posted 23 October 2012 - 10:48 AM
- SamuriHL likes this
#1782
Posted 23 October 2012 - 11:17 AM
When I apply the FXZ 905 update, I see this message "error: cannot load '.\905_FXZ\mbmloader_hs.bin'
The rest of the update looks fine. When the device reboots, it says it's now running 905.
Should I be worried about this error message? Am I missing something?
Should I run it again?
#1783
Posted 23 October 2012 - 11:19 AM
Thanks!
Mark
P.S. FYI...I'm not really that n00b...I've run many ROM's on my OG Droid.
#1784
Posted 23 October 2012 - 11:20 AM
Or not. Goddamnit....I thought I fixed that. 8.6 coming up soon. Hold on.
Non potest esse nisi unus
#1785
Posted 23 October 2012 - 11:25 AM
That's how it works. For about 4 days battery life is all over the place. Once the phone settles down it's ____ing unreal how good it can be.
I bet it's the brain playing tricks on you. After update the battery runs like shiat, you get used to it after a while. Battery goes back to normal and you're like ZOMG THIS IS TEH BEST SHIAT EVAR!
#1786
Posted 23 October 2012 - 11:25 AM
o) FXZ keep data bug squashed
Non potest esse nisi unus
#1787
Posted 23 October 2012 - 11:26 AM
I'm coming from 893 with root.
When I apply the FXZ 905 update, I see this message "error: cannot load '.\905_FXZ\mbmloader_hs.bin'
The rest of the update looks fine. When the device reboots, it says it's now running 905.
Should I be worried about this error message? Am I missing something?
Should I run it again?
Get 8.6. My bad. Sorry about that.
Non potest esse nisi unus
#1788
Posted 23 October 2012 - 11:26 AM
I bet it's the brain playing tricks on you. After update the battery runs like shiat, you get used to it after a while. Battery goes back to normal and you're like ZOMG THIS IS TEH BEST SHIAT EVAR!
LOL. No, the phone is doing a whole bunch of crap for the first couple days so performance and battery life suck hard. After it's finished doing whatever the hell it's doing and it settles down, both are tremendous.
Non potest esse nisi unus
#1789
Posted 23 October 2012 - 11:27 AM
Here's the log:
SamuriHL’s House of Bionic 8.5
Ready to flash FXZ...
* Flashing will take about 10-20 minutes
[NOTE: Your phone must be in AP Fastboot]
Continue when ready to start flashing
Press any key to continue . . .
sending ’mbm’ (256 KB)... OKAY [ 0.030s]
writing ’mbm’... OKAY [ 0.802s] _
rebooting into bootloader... OKAY [ 0.289s]
Press any key to continue . . .
error cannot load ’.\905_FXZ\mbmloader_hs.bin’
sending ’mbm’ (256 KB)... OKAY [ 0.028s]
writing ’mbm’... OKAY [ 0.495s]
rebooting into bootloader... OKAY [ 0.290s]
Press any key to continue . . .
sending ’cdt.bin’ (16 KB)... OKAY [ 0.009s]
writing ’cdt.bin’... OKAY [ 0.625s]
erasing ’cache’... OKAY [ 0.472s]
sending ’lbl’ (16 KB)... OKAY [ 0.008s]
writing ’lbl’... OKAY [ 2.518s]
sending ’ebr’ (16 KB)... OKAY [ 0.260s]
writing ’ebr’... OKAY [ 0.767s]
sending ’devtree’ (512 KB)... OKAY [ 0.317s]
writing ’devtree’... OKAY [ 0.805s]
sending ’system’ (262144 KB)... OKAY [ 23.674s]
writing ’system’... OKAY [ 15.475s]
sending ’system’ (229120 KB)... OKAY [ 20.756s]
writing ’system’... OKAY [ 11.999s]
sending ’boot’ (8192 KB)... OKAY [ 0.758s]
writing ’boot’... OKAY [ 0.879s]
sending ’recovery’ (9216 KB)... OKAY [ 1.051s]
writing ’recovery’... OKAY [ 1.344s]
sending ’cdrom’ (12032 KB)... OKAY [ 1.229s]
writing ’cdrom’... OKAY [ 1.927s]
sending ’preinstall’ (262144 KB)... OKAY [ 23.790s]
writing ’preinstall’... OKAY [ 14.592s]
sending ’preinstall’ (49152 KB)... OKAY [ 4.038s]
writing ’preinstall’... OKAY [ 2.653s]
sending ’radio’ (21848 KB)... OKAY [ 1.941s]
writing ’radio’... OKAY [ 3.417s]
rebooting...
Press any key to continue . . . _
#1790
Posted 23 October 2012 - 11:28 AM
Maybe try updating to the latest version of HoB where that error is fixed?
Or not. Goddamnit....I thought I fixed that. 8.6 coming up soon. Hold on.
Hehehe
ICS Droid Bionic .24...........6!
courtesy of "some random ninja"
OC @ 1.333Ghz sadly this phone now out specs my PC by 2.5x......
#1791
Posted 23 October 2012 - 11:35 AM
I downloaded the HoB on the first page, 8.5.
Here's the log:
SamuriHL’s House of Bionic 8.5
Ready to flash FXZ...
* Flashing will take about 10-20 minutes
[NOTE: Your phone must be in AP Fastboot]
Continue when ready to start flashing
Press any key to continue . . .
sending ’mbm’ (256 KB)... OKAY [ 0.030s]
writing ’mbm’... OKAY [ 0.802s] _
rebooting into bootloader... OKAY [ 0.289s]
Press any key to continue . . .
error cannot load ’.\905_FXZ\mbmloader_hs.bin’
sending ’mbm’ (256 KB)... OKAY [ 0.028s]
writing ’mbm’... OKAY [ 0.495s]
rebooting into bootloader... OKAY [ 0.290s]
Press any key to continue . . .
sending ’cdt.bin’ (16 KB)... OKAY [ 0.009s]
writing ’cdt.bin’... OKAY [ 0.625s]
erasing ’cache’... OKAY [ 0.472s]
sending ’lbl’ (16 KB)... OKAY [ 0.008s]
writing ’lbl’... OKAY [ 2.518s]
sending ’ebr’ (16 KB)... OKAY [ 0.260s]
writing ’ebr’... OKAY [ 0.767s]
sending ’devtree’ (512 KB)... OKAY [ 0.317s]
writing ’devtree’... OKAY [ 0.805s]
sending ’system’ (262144 KB)... OKAY [ 23.674s]
writing ’system’... OKAY [ 15.475s]
sending ’system’ (229120 KB)... OKAY [ 20.756s]
writing ’system’... OKAY [ 11.999s]
sending ’boot’ (8192 KB)... OKAY [ 0.758s]
writing ’boot’... OKAY [ 0.879s]
sending ’recovery’ (9216 KB)... OKAY [ 1.051s]
writing ’recovery’... OKAY [ 1.344s]
sending ’cdrom’ (12032 KB)... OKAY [ 1.229s]
writing ’cdrom’... OKAY [ 1.927s]
sending ’preinstall’ (262144 KB)... OKAY [ 23.790s]
writing ’preinstall’... OKAY [ 14.592s]
sending ’preinstall’ (49152 KB)... OKAY [ 4.038s]
writing ’preinstall’... OKAY [ 2.653s]
sending ’radio’ (21848 KB)... OKAY [ 1.941s]
writing ’radio’... OKAY [ 3.417s]
rebooting...
Press any key to continue . . . _
Yea, as I said, my bad. I fixed it in the FULL FXZ but missed it in the keep data FXZ. Sorry about that.
Non potest esse nisi unus
#1792
Posted 23 October 2012 - 11:37 AM
Get 8.6. My bad. Sorry about that.
OK
So I assume I need to rerun FXZ.
Trying it now.
Thanks.
#1793
Posted 23 October 2012 - 11:44 AM
OK
So I assume I need to rerun FXZ.
Trying it now.
Thanks.
It'd be a good idea. I'm also wondering if, coming from a previous version, you might wanna run the Repair WEBTOP option in the utility menu just to be on the safe side. Do that after the FXZ finishes.
Non potest esse nisi unus
#1794
Posted 23 October 2012 - 11:55 AM
It'd be a good idea. I'm also wondering if, coming from a previous version, you might wanna run the Repair WEBTOP option in the utility menu just to be on the safe side. Do that after the FXZ finishes.
What does that do?
Is that only necessary if I use the Webtop accessories or for other things as well?
#1795
Posted 23 October 2012 - 11:56 AM
Non potest esse nisi unus
#1796
Posted 23 October 2012 - 12:08 PM
PS Thanks for the HoB, went from .230 through .247 and back to .246 using HoB over the months, only one hiccup and a factory reset solved that in the early .240's.
#1797
Posted 23 October 2012 - 12:10 PM
SamuriHL, since you/someone got the .905 FXZ by politely asking, is there a .246 FXZ yet?
PS Thanks for the HoB, went from .230 through .247 and back to .246 using HoB over the months, only one hiccup and a factory reset solved that in the early .240's.
It has arrived! Just a bit ago
Sent from my DROID BIONIC using Tapatalk 2
#1798
Posted 23 October 2012 - 12:19 PM
Non potest esse nisi unus
#1799
Posted 23 October 2012 - 12:39 PM
I'm already on top of it. They made changes to the 246 FXZ that will require a HoB update. 905 will *NO LONGER BE SUPPORTED* by the HoB.
Have a link?
#1800
Posted 23 October 2012 - 12:44 PM
Have a link?
PM'd. The HoB doesn't use the straight FXZ so posting it here would only confuse people.
Non potest esse nisi unus
Also tagged with one or more of these keywords: HoB
Answered
Legacy Devices →
VZW Droid Bionic [XT875-CDMA/LTE] →
Droid Bionic Development [XT875] →
Droid Bionic Help [XT875] →
no screen bionicStarted by scoutss2 , 01 Feb 2013 fxz, hob, safestrap |
|
|
8 user(s) are reading this topic
0 members, 8 guests, 0 anonymous users