To start off I wanted to say I read your FAQ and your OP as well as scanning thru a bit of the replys to this post trying to find something that might be able to help me. My problem im running into is trying to apply the 246 update. I was running safestrap so I returned to my unsafe side and uninstalled the safestrap recovery then I uninstalled safestrap. Also I was running the .232 leak. Then I FXZ'ed to .905 and applied the .246 update. It updated fine with no errors but when I rebooted it doesnt go past the "M" Motorolla boot logo (also I noticed that its just the "M" logo, it doesnt say "Dual core technology" under the logo like normal. Also now I can not boot into recovery, when I try it takes me to the "M" boot logo screen. Any boot option I choose now takes me to the boot logo screen OTHER THEN AP fastboot. AP fastboot loads as normal. I dont know if this matters but incase it does, before 246 came out as the OTA when I would FXZ to .905 and update to 232 after I did the FXZ to .905 I was never able to boot to .905, it would get stuck at the boot logo screen. The only way I was able to get my phone to boot was to do the FXZ then apply the 232 update over it. Seems to me it would load the .905 FXZ but it wouldnt be bootable. I figured it would be the same with 246, FXZ to .905, update right away to 246 and it would boot. Sadly not After this failed (leaving me stuck at boot logo screen no matter what i tried, other then AP fastboot) I went ahead and tried the HoB 246 install. I had no errors and it seemed to install just fine. However after it finished I am still not able to boot into recovery (boots to and gets stuck on logo screen) to apply the update. Then I did the HoB 246 reinstall with same outcome. I hope I have given enough info about my problem. If I left anything out that would help I will sure be glad to explain anything else the best i can And I would like to thank Samuri (and many others here but maybe just a liiiiittle bit less lol) for all the work/time/patience he has put into HoB and the help he has provided so many of us bionic'ers =p Sorry for such a long post :/
This one's interesting. Bootlooping like that implies corrupt data. I'm going to give you specific instructions and if they don't work you might be the only one stuck til an fxz comes out. Sadly this is going to wipe your data partition.
O) boot the phone into ap fastboot mode
O) load up the house
O) on the utility menu use the factory reset option
O) If the phone reboots put it back in AP fastboot mode
O) Use the reinstall option starting at the flash step
See what happens. Note that the update must be on your sdcard before you do this. Since the phone isn't booting you'll have to pull the sdcard and manually copy it there if it's not already. I'll need specific info if this fails.. Copy the output of the flash step, any errors you get, etc. I'll see what I can do to help.
Sent from my Xoom using Tapatalk 2