#1481
Posted 20 October 2012 - 07:52 PM
Sent from my Xoom using Tapatalk 2
Non potest esse nisi unus
#1482
Posted 20 October 2012 - 08:02 PM
DroidBionic [Running ICS thanks to HoB, now running Jelly Bean]
#1483
Posted 20 October 2012 - 08:10 PM
I didn't think about that until I stepped away for a while. I had reinstalled the drivers, several different usb cables and ports, etc. Not sure what I could have done wrong originally. Uninstall/reinstalling house of bionic might make a decent addition to that FAQ question.
Thanks for the help and it is great the work you have put into it.
#1484
Posted 20 October 2012 - 08:19 PM
* Flashing will take about 10-20 minutes
[NOTE: Your phone must be in AP Fastboot]
Continue when ready to start flashing
Press any key to continue . . .
sending 'mbm' (256 KB)... OKAY [ 0.031s]
writing 'mbm'... OKAY [ 0.469s]
rebooting into bootloader... OKAY [ 0.266s]
Press any key to continue . . .
error: cannot load '.\905_FXZ\mbmloader_hs.bin'
sending 'mbm' (256 KB)... OKAY [ 0.031s]
writing 'mbm'... OKAY [ 0.453s]
rebooting into bootloader... OKAY [ 0.281s]
Press any key to continue . . .
sending 'cdt.bin' (16 KB)... OKAY [ 0.000s]
writing 'cdt.bin'... INFOPreflash validation failure
FAILED (remote: )
erasing 'cache'... OKAY [ 0.297s]
erasing 'userdata'... OKAY [ 0.969s]
sending 'lbl' (16 KB)... OKAY [ 0.000s]
writing 'lbl'... OKAY [ 1.125s]
sending 'ebr' (16 KB)... OKAY [ 0.234s]
writing 'ebr'... OKAY [ 0.438s]
sending 'devtree' (512 KB)... OKAY [ 0.281s]
writing 'devtree'... INFOPreflash validation failure
FAILED (remote: )
sending 'system' (262144 KB)...
The failed remote happens throughout the script. What does that mean?!?
#1485
Posted 20 October 2012 - 08:40 PM
I flashed 246 with hob this am and everything went perfectly. Thx Sam.
So I went home to do the wife's bionic and have nothing but problems. Everything went fine until apfastboot mode comes up and hob says one file copied, rsd comes on my laptop for a second, goes off and hob thinks it finished. When I reboot the phone nothing changed, it booted fine. Then I tried the repair apfastboot and hob said no errors found. But then rebooting the phone goes straight into apfastboot with a boot error. No longer will it boot. What did I f. u.? She's gonna kill me....
Sent from my ICS DROID BIONIC using my fingers
I had a similar problem when HoBing my wife's phone. My theory is that when I plugged it in, it launched my installed version of RSD as part of the autodetect process. When HoB tries to launch its version of RSD, it fails because a conflicting version is already in memory. That's my theory anyway.
To fix it, I just rebooted my PC and tried again. After that, HoB worked flawlessly.
#1486
Posted 20 October 2012 - 08:56 PM
Sent from my ICS DROID BIONIC using my fingers
#1487
Posted 20 October 2012 - 09:22 PM
Hey, been there before lolWhy is it always the wives phones... LOL
Sent from my ICS DROID BIONIC using my fingers
Sent from my DROID BIONIC using Tapatalk 2
#1488
Posted 20 October 2012 - 10:33 PM
Invalid CG Version (CG:devtree)
- bzbionic likes this
#1489
Posted 20 October 2012 - 10:59 PM
#1490
Posted 21 October 2012 - 12:45 AM
When phone goes into apfastboot, the error at the bottom is:
Invalid CG Version (CG:devtree)
Saw your post in xda concerning this error and tried all the recommendations without luck. After attempting to repair the cdt.bin file with the install 246 option and repair apfastboot, 2 other errors occur trying to get to recovery:
invalid cg version (CG recovery) and invalid cg. Version (CG? Don't remember)
This phone was eclipse 3.0 over 905 with bootstrap. Never had safe strap on her phone. Man, I am lost. Even tried rsd back to 902 and it fails on file 6/22 cdt bin as all attempts at rsd have.
What's the best way to get the correct cdt.bin file back on the phone?
I even tried pushing the cdt.bin file from 902 and 905 into the xml and reran the apfastboot repair with no luck.
Originally I was trying to fxz the 905 file in prep for 946 when the errors occurred in apfastboot with norsd file and then tried to repair apfastboot when all this happened.
Sent from my ICS DROID BIONIC using my fingers
#1491
Posted 21 October 2012 - 01:19 AM
#1492
Posted 21 October 2012 - 03:09 AM
Hello. I have run in to an issue. I was running 232 on my bionic and with the release of the update I used this thread to try and upgrade to 246. I have read it and the FAQ several times prior to trying it (not saying I didnt miss something). I downloaded all the required items. I choose the first option to on the first screen and then the first on teh second (install 246). Installed update to sd-ext card manully and followed all steps up to installing the update. It continued but errored at that point. Aborted error in sideload package. Now the phone will not boot. Wont boot into anything but AP fast boot. I tried to reinstall and repair with no luck. Any help would be appreciated. I am sure it was something I did wrong. Thanks again.
Can you post the swdl file from inside the hob folder? I'm sure Sam will want to see it. Sounds like rsd might not have flashed correctly.
Sent from my DROID BIONIC using Tapatalk 2
#1493
Posted 21 October 2012 - 03:32 AM
#1494
Posted 21 October 2012 - 04:59 AM
Sent from my Xoom using Tapatalk 2
Non potest esse nisi unus
#1495
Posted 21 October 2012 - 05:16 AM
I tried the install from my Mac and followed all the instructions.
However, during installation, said E: signature verification failed, installation aborted. I tried a few more times, but then gave up and tried rebooting just to have the phone working. Now, I get a black screen. I can still do AP Fastboot and also recovery.
I *was* running 223 from back in July. I'm no phone genius but I managed to get that working just fine with no problems. This time, I can tell I'm now over my head.
I still had that 223 package on my sd card, so I tried installing that. Error was assert failed: Mount ("ext3", "MTD", "system", "/system") Error in /tmp/sideload/package.zip (Status 7).
So, my plan was to borrow my friends microSD card reader, re-download 246 and 905, stick them on the card, and try again. Any other suggestions?
#1496
Posted 21 October 2012 - 05:54 AM
Second, RSD is failing in an abnormally high number of cases. I'm changing that. However, due to a bug in the non-rsd flashing, when the RSD flash failed, and I had people switch to non-rsd flashing, it would make the situation worse. That is being fixed.
Non potest esse nisi unus
#1497
Posted 21 October 2012 - 06:14 AM
ICS Droid Bionic
.24...........6! courtesy of HoB
OC @ 1.333Ghz
#1498
Posted 21 October 2012 - 06:15 AM
ICS Droid Bionic
.24...........6! courtesy of HoB
OC @ 1.333Ghz
#1499
Posted 21 October 2012 - 06:49 AM
PLEASE PAY ATTENTION TO THE CHANGES!!!
o) RSD is NO LONGER the default. See the FAQ on how to enable it if you wish to continue using it
o) Fixed a bug in the REINSTALL option that would lead to an AP Fastboot flash failed error
o) Fixed a bug in the FXZ FULL option that would lead to an AP Fastboot flash failed error
o) Added new utility menu
o) Added wipe cache option (WARNING: NOT TESTED)
o) Added factory reset option (WARNING: NOT TESTED)
o) Moved root to utility menu
o) Moved show processor info to utility menu
Those with all the AP Fastboot errors, install 8.2, then do the following:
With your phone in AP Fastboot mode:
o) Select 246
o) Select REINSTALL
o) Select N to transfer, N to check hash, N to reboot to AP Fastboot
o) Select Y at flash option
o) Continue to follow directions
IF the flash step fails, COPY the output from the HoB CMD prompt window and paste it into a post here for me to see it.
Non potest esse nisi unus
#1500
Posted 21 October 2012 - 06:55 AM
Non potest esse nisi unus
Also tagged with one or more of these keywords: HoB
Answered
Legacy Devices →
VZW Droid Bionic [XT875-CDMA/LTE] →
Droid Bionic Development [XT875] →
Droid Bionic Help [XT875] →
no screen bionicStarted by scoutss2 , 01 Feb 2013 fxz, hob, safestrap |
|
|
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users