1861 replies to this topic

[milkshed27]

Hotplug is a different governor that shuts down one core when not needed to conserve battery. Its not necessary, but it can help with battery life.

Sent from my DROID SPYDER

I've asked this question a couple of times in other threads, perhaps you might know the answer. What is the difference between the hotplug governor and the CPUsleeper app that many people seem to be using at the moment? It is my understanding that they perform the same function which is to turn off one core during times of low CPU usage. Wouldn't that make using both hotplug governor and the CPUsleeper app redundant? Thanks in advance.

[Brad92]

CPU sleep turns off a core when the screen turns off, hotplug turns cores off when the CPU usage is low. Which could mean that the screen might be on when hotplug turns off a core.

Using both probably isn't bad, and it would turn a core off more often.

Sent from my DROID SPYDER

[Picaso86]

Hotplug is a different governor that shuts down one core when not needed to conserve battery. Its not necessary, but it can help with battery life.

Sent from my DROID SPYDER

Thanks dude!

Do you know the proper settings to use in SETCPU hotplug?

[dwmackay]

Morning,

Does HDMI out work on this ROM similar to the Stock version?

Doug M.

[Picaso86]

I've been running this ROM for almost 24 hours, it is extremely fast and smooth but I am having an issue. I cant seem to get any 4G signal at all (there's a excellent 4G signal around my area). I've tried using the LTE switch, airplane mode and no luck... any ideas??? :/

[melfunn]

I've been running this ROM for almost 24 hours, it is extremely fast and smooth but I am having an issue. I cant seem to get any 4G signal at all (there's a excellent 4G signal around my area). I've tried using the LTE switch, airplane mode and no luck... any ideas??? :/

Try switching to GSM, screen should flicker & then switch back to CDMA Lte. That has worked with other Roms.

Sent from my DROID RAZR

[Brad92]

Thanks dude!

Do you know the proper settings to use in SETCPU hotplug?

No problem. Just choose hotplug and set at boot. I use ROM Toolbox Pro though, but it should be the same

Sent from my DROID SPYDER

[Brad92]

I've been running this ROM for almost 24 hours, it is extremely fast and smooth but I am having an issue. I cant seem to get any 4G signal at all (there's a excellent 4G signal around my area). I've tried using the LTE switch, airplane mode and no luck... any ideas??? :/

Maybe try wiping data, or wiping just cache and dalvik cache. I got good 4G data when I was running it.

Try switching to GSM, screen should flicker & then switch back to CDMA Lte. That has worked with other Roms.

Sent from my DROID RAZR

That only applies for ROMs not based on Moto builds like CM9, AOKP and other AOSP ROMs

Sent from my DROID SPYDER

[EmericanX]

+1 this is built on the moto release so there should be no data issues.

Matter of fact the latest CM9 builds im finding solid as well.

To let everyone know I had no time this weekend. I'm on call right now and stayed slammed! I'll just say I'm working on roughly only an hour of sleep last night before I had to get up and start the regular week. Wish me luck that the rest of the week is quite! Lol.

Sent from my DROID RAZR using Tapatalk 2

[milkshed27]

CPU sleep turns off a core when the screen turns off, hotplug turns cores off when the CPU usage is low. Which could mean that the screen might be on when hotplug turns off a core.

Using both probably isn't bad, and it would turn a core off more often.

Sent from my DROID SPYDER

Thank you for your response. I've got one more question. After I install the CPUsleep app, I click on start service twice like it says but then the app just closes (not a force close though). After the initial permission by Superuser it never grants CPUsleep permission again (whenever I turn on the screen) that I've seen. Could this mean that CPUsleep is not actually running? Thanks for your help.

[milkshed27]

+1 this is built on the moto release so there should be no data issues.

Matter of fact the latest CM9 builds im finding solid as well.

To let everyone know I had no time this weekend. I'm on call right now and stayed slammed! I'll just say I'm working on roughly only an hour of sleep last night before I had to get up and start the regular week. Wish me luck that the rest of the week is quite! Lol.

Sent from my DROID RAZR using Tapatalk 2

UGH... functioning with no sleep suuuuuucks. Hope you're able to get through the week alright. Good Luck!

[Brad92]

+1 this is built on the moto release so there should be no data issues.

Matter of fact the latest CM9 builds im finding solid as well.

To let everyone know I had no time this weekend. I'm on call right now and stayed slammed! I'll just say I'm working on roughly only an hour of sleep last night before I had to get up and start the regular week. Wish me luck that the rest of the week is quite! Lol.

Sent from my DROID RAZR using Tapatalk 2

No rush man! I understand about being slammed.

Thank you for your response. I've got one more question. After I install the CPUsleep app, I click on start service twice like it says but then the app just closes (not a force close though). After the initial permission by Superuser it never grants CPUsleep permission again (whenever I turn on the screen) that I've seen. Could this mean that CPUsleep is not actually running? Thanks for your help.

You can use CPU Spy to see if and how long the phone has been in deep sleep


Sent from my DROID SPYDER

[milkshed27]

Edit: Deleted. Don't want to spam 2 threads with similar questions.

[Picaso86]

Try switching to GSM, screen should flicker & then switch back to CDMA Lte. That has worked with other Roms.

Sent from my DROID RAZR

DUDE YOU ARE A GENIUSSSS! thank you... it worked..

You dont know how long I've been messing around with my Maxx trying to fix it lol

[Picaso86]

No problem. Just choose hotplug and set at boot. I use ROM Toolbox Pro though, but it should be the same

Sent from my DROID SPYDER

Thanks you guys are awesome!

[Mr. Orange 645]

+1 this is built on the moto release so there should be no data issues.

Matter of fact the latest CM9 builds im finding solid as well.

To let everyone know I had no time this weekend. I'm on call right now and stayed slammed! I'll just say I'm working on roughly only an hour of sleep last night before I had to get up and start the regular week. Wish me luck that the rest of the week is quite! Lol.

Sent from my DROID RAZR using Tapatalk 2

I completely understand. I'm on call this week starting tomorrow. It's called "Hell Week" around here.

[Brad92]

Try switching to GSM, screen should flicker & then switch back to CDMA Lte. That has worked with other Roms.

Sent from my DROID RAZR

My apologies, I didn't realize it may be necessary on this rom since it is based on the .211 build. I'm sorry.

DUDE YOU ARE A GENIUSSSS! thank you... it worked..

You dont know how long I've been messing around with my Maxx trying to fix it lol

Glad melfunn got ya fixed up

Sent from my DROID SPYDER

[melfunn]

DUDE YOU ARE A GENIUSSSS! thank you... it worked..

You dont know how long I've been messing around with my Maxx trying to fix it lol

I am no genius. I just follow other's ideas & pass it on as only a suggestion. Glad you got data going.

Sent from my DROID RAZR

[mugsy77]

Loving this ROM. I think I said it already, but wanted to bring the topic back to life as it has been 2 days since last post! =)

[Silverlink34]

Hello EmericanX,

I have a request. I have been having a lot of trouble trying to figure out how to make the blur camera compatible with aosp gallery. Could you either tell me how to patch it or give me permission to use yours??

Thanks a lot! Go Devs!