85 replies to this topic

[tucstwo]

The version in the tool. However I am on CWM now so that is good.

More important issue, however. I have lost the ability to charge. I was rooted running safestrap and the energy rom 3/18/13. Once I unlocked the bootloader, I get an exclamation point over my battery in the status bar and it will not charge on wall charger. Only charges when connected to usb very, slowly. I cannot seem to re-flash the energy rom while on recovery. I get "unable to flash energy_ROM_RAZRM_03.14.2013.zip" reason "error".

Interestingly. The charging issue cleared itself up. I must have disconnected it during some process. A reboot while attached to the pc has now fixed it. The exclamation point is gone, and it charges on both wall and pc. Weird.

It's my understanding and roms that were originally designed to be flashed with safestrap you need to first manually mount /system before you flash em.

[tucstwo]

The version in the tool. However I am on CWM now so that is good.

More important issue, however. I have lost the ability to charge. I was rooted running safestrap and the energy rom 3/18/13. Once I unlocked the bootloader, I get an exclamation point over my battery in the status bar and it will not charge on wall charger. Only charges when connected to usb very, slowly. I cannot seem to re-flash the energy rom while on recovery. I get "unable to flash energy_ROM_RAZRM_03.14.2013.zip" reason "error".

Interestingly. The charging issue cleared itself up. I must have disconnected it during some process. A reboot while attached to the pc has now fixed it. The exclamation point is gone, and it charges on both wall and pc. Weird.

It's my understanding and roms that were originally designed to be flashed with safestrap you need to first manually mount /system before you flash em.

[brandon71]

It's my understanding and roms that were originally designed to be flashed with safestrap you need to first manually mount /system before you flash em.

yea that's right gotta mount before wiping and mount before flashing

Sent from my XT907 using Tapatalk 2

[tucstwo]

updated to version 2 to help those having problems with recovery sticking

[nprevette420]

Installed TWRP and reboted to recovery but it was stuck on the boot logo. Tried CWM and it was fine. Anyone else having this problem?

[wapiti_j]

Installed TWRP and reboted to recovery but it was stuck on the boot logo. Tried CWM and it was fine. Anyone else having this problem?

Yes. That very issue.

[tucstwo]

Installed TWRP and reboted to recovery but it was stuck on the boot logo. Tried CWM and it was fine. Anyone else having this problem?

Installed TWRP and reboted to recovery but it was stuck on the boot logo. Tried CWM and it was fine. Anyone else having this problem?

Yes. That very issue.

I've heard through pm too that some people are having problems with the TWRP that's out there. I'm amazed the a recovery could be causing boot up problems. You guys have safestrap uninstalled, right? Bootloaders are unlocked? Just bouncing ideas.

[brandon71]

Installed TWRP and reboted to recovery but it was stuck on the boot logo. Tried CWM and it was fine. Anyone else having this problem?

Installed TWRP and reboted to recovery but it was stuck on the boot logo. Tried CWM and it was fine. Anyone else having this problem?

Yes. That very issue.

I've heard through pm too that some people are having problems with the TWRP that's out there. I'm amazed the a recovery could be causing boot up problems. You guys have safestrap uninstalled, right? Bootloaders are unlocked? Just bouncing ideas.

Yea it's been confusing me to death the only roms I can't flash is rage and trippin beam but everything else flashes fine for me idk what could be causing problems for other people

Sent from my XT907 using Tapatalk 2

[wapiti_j]

I've heard through pm too that some people are having problems with the TWRP that's out there. I'm amazed the a recovery could be causing boot up problems. You guys have safestrap uninstalled, right? Bootloaders are unlocked? Just bouncing ideas.

Yes, safestrap uninstalled, and Bootloader Unlocked.  I am getting ready to try something else.  However, all problems started when I unlocked the bootloader and uninstalled safestrap.

[nprevette420]

I've heard through pm too that some people are having problems with the TWRP that's out there. I'm amazed the a recovery could be causing boot up problems. You guys have safestrap uninstalled, right? Bootloaders are unlocked? Just bouncing ideas.

SafeStrap is uninstalled, bootloader is unlocked. TWRP recovery causes boot to hang. I used CWM and it worked fine. I installed CM10 4/14 build through CWM with no issues.

[shane1]

yea that's right gotta mount before wiping and mount before flashing

Sent from my XT907 using Tapatalk 2

in order to get dst to boot i had to reboot recovery after wiping then remount system.

[Deacon]

just bricked my phone using this trying to flash twrp

[Deacon]

stuck on bootloader unlocked screen any help/advice

[Deacon]

got it to boot with power+voil down nm

[Deacon]

got twrp to install by rebooting to bootloader then flashing the image, much easier..

[tucstwo]

I just updated the OP to version 3. I replaced the version of TWRP that was in the package. The one I had in there didn't have a matching MD5 to Hashcodes current TWRP on his Goo.im. So, hopefully that will fix ll those who had booting issues with TWRP flashes gone wrong 

[brandon71]

The Version in hashes goo was 2.4alpha and it's restore was buggy unless he updated it to a newer version

Sent from my XT907 using Tapatalk 2

[tucstwo]

got twrp to install by rebooting to bootloader then flashing the image, much easier..

Sure easy peasy for someone who knows how to do it. Not everyone is comfortable with a command line. And the instructions are in the OP for those who want to do so manually.

The Version in hashes goo was 2.4alpha and it's restore was buggy unless he updated it to a newer version

Sent from my XT907 using Tapatalk 2

IDK, the version I had in there was causing nothing more than soft bricks. So my suggestion is for peeps to just stick with CWM at the moment if that's the case. I religiously use CWM so I am the wrong person to ask.

[brandon71]

The Version I'm using is 2.3.2.3 and I haven't had any problems out of it

Sent from my XT907 using Tapatalk 2

[tucstwo]

The Version in hashes goo was 2.4alpha and it's restore was buggy unless he updated it to a newer version

Sent from my XT907 using Tapatalk 2

Actually no, I just confirmed. The TWRP included in version 1 and 2 was the same 2.4 TWRP that Hash uploaded on 4/8. The one that's "buggy". Only difference was that my version of it had a mismatched MD5 sum with what Hash uploaded. So even if this copy is buggy, it's at least WHAT Hash made and not a corrupt version.

The Version I'm using is 2.3.2.3 and I haven't had any problems out of it

Sent from my XT907 using Tapatalk 2

If you want, PM me a link to that please and I will include it. Thanks a lot